Invoicing another tax point, consult customer service in detail!

Name: Internship Patch

Material: reflective material

Material introduction: The selected materials for our car stickers have the properties of oil -proof, corrosion, aging, high temperature resistance, aging resistance, wear resistance and other properties.Not ordinary materials

[Step of car owner pretend to post]:

1. Wash the position that you need to install on the body and wipe it with a clean towel to the dry state.Small sticker installation method:

2. Turn off the sticker bottom paper directly, stick it to the part you want to install, and scrape it with a scraper (or bank card).

3. Carefully remove the metastatic film on the sticker.

Large sticker installation and stickers (stickers above 100 cm):

1. Prepare a watering pot to install a clean water with detergent (the effect of detergent is lubricating to avoid being moved when the position is wrong.); A soft and clean towel; a hot air gun (or hair dryer).

2. Use water with a detergent to be sticked and spray evenly to keep it moist.

3. Tear the bottom paper on the back of the sticker and stick it to the packed part. Because it is a larger sticker, you should fix one side first, and then fix the other side.

4. Taking the center of the sticker as the original point, use a plastic scraper to evenly scrape the surrounding direction. The purpose is to scrape the water to avoid leaving bubbles.After the sand is removed, continue to scrape it.

5. After scraping all, keep it for 15-20 minutes, let the stickers completely dry, and then tear the metastatic film on the surface of the sticker; if you want to dry it quickly, you can use a hot air gun to gently heat it to heat (pay attention to the distance), wait for the sticker to sticker, and wait for the sticker to sticker.After drying, you can tear the metastatic membrane away.

Precautions:

1. Be careful when installing, avoid not to let the stickers stick together.

2. Please do not wash your car within three days, because the stickers have not been fully pasted during this time, and the high -pressure water column of the car washing will affect it.After three days of car washing, it was not hindered.

Focus on car supplies development and production, one -stop purchase of car products