Precautions for self -adhesive wallpaper:

1. The size of the self -adhesive wallpaper is a custom model, which needs to be cut according to size, so non -quality problems will not be refunded (the bubbles are not a quality problem)

2. Check whether the wall surface is clean and flat before installing. The dust and uneven places will affect the viscosity and service life of the self -sticking wallpaper.For large white walls or putty walls or latex paint walls, you need to check whether there is a wall ash off. If there is a wall ash off, you need to apply the base film on the wall and then stick the wallpaper.

3. During construction, first tear about five centimeters of self -sticking wall container protection film, and stick it to the surface of the wall, and scrape it with a scraper.First use a scraper to scrape the middle of the adhesive wallpaper, and then scrape it from the middle of the wallpaper to both sides (so that the construction bubbles will be relatively small).At the starting point of the front five centimeters, it is slowly scraped with a scraper while tearing the protective film. It is recommended that you follow the wall from top to bottom.After the construction, you must wipe it with a clean drying cloth, so that you can better fit the self -sticking wallpaper and the wall surface to reduce the production of bubbles as much as possible.If there is still a bubble, first use the split pins at home to release the gas on the air bubbles on the surface of the wallpaper, and then blow it with a hair dryer. Finally, scrape it with a scraper.