Dear customers, our products do not include freight, and need to communicate with customer service to fill in the cost of weight logistics and other information.IntersectionIf you take a picture of your own, thank you for your understanding!

The price of this product is marked as a single claw price. You need a double claw suction cup or a three claw suction cup to enter the store to purchase.

Some expertise and notes on glass suction cups:

◆Principle, structure and use Glass suction plate, also known as glass suction lifter, is a manual tool mainly used to suck and lift surface smooth items such as glass plates.It uses the deformation of the rubber pad installed on the suction plate to create a vacuum and firmly suck the item with the help of atmospheric pressure, so as to achieve the purpose of lifting and moving the item.

◆How to use and scope of application When using, wipe the glue pad and the items to be sucked with cloth. Put the glue pad flat against the items, and force the suction plate to press tightly on the surface of the item and pull off the plastic handle at the same time. The rubber pad is pulled up and deformed, forming a cavity with a considerable vacuum between the rubber pad and the items to be sucked. At the moment, the suction plate can firmly suck the items. At this time, the item can be lifted and moved by hand.After the items are moved and put down, pull the handle to the original position, and the glue pad is restored to level so that the vacuum releases the air pressure and tends to balance, that is, it completes a suction and lifting work.If the suction plate is still adsorbed on the item and cannot be removed, you can slightly lift the edge of the rubber pad with your fingers, and the air enters the vacuum cavity to separate the two.The glass suction plate is divided into four types, including single claws, double claws (fixed), curved double claws, and three claws. Users can choose according to the size and weight of the item to be sucked and lifted.For larger and heavier items, it is possible that two people use multiple suction plates to work simultaneously.

◆Safety and precautions To achieve safe use, users are advised to pay attention to and obey the following items when using this product:

1. The operator must understand the performance and working principle of this product before use, and if necessary, please ask an experienced person to provide guidance on site;

2. Before use, check whether all parts of this product are intact, and the parts must not be damaged, cracked or hardened by the rubber pad;

3. This product is only suitable for short-term extraction items. If it needs to be used for a long time, check whether the glue pad and the item are adsorbed tightly, and should be reinstalled once if necessary;

4. This suction plate is a portable tool and cannot be used on large mechanical equipment such as cranes and cranes, nor can it be used to support the entire person's weight;

5. The absorbed items must have a flat, smooth, dry, clean and impermeable surface, and must not be contaminated by oil, water, dust, etc. Otherwise, the absorption and lifting capacity of this product will be reduced, and even completely invalid and inability to use;

6. Pay attention to check whether the elasticity of the rubber pad is good, as this will affect the load limit. When the load capacity is reduced due to damage to the rubber pad or other reasons, the rubber pad should be replaced in time;

7. When this product is not in use, it should be placed in a flat place and not be pressed by other items to prevent the rubber pad from being deformed due to long-term pressure;

8. Only use parts of Detu brand for repair. If the user uses other parts, we do not guarantee the quality and performance of the product;

9. If the user fails to comply with the instructions of this instruction to operate and causes various accidents or causes losses, we shall not bear legal liability for this.

◆ Remarks

A. Keep the glue pad clean and do not be contaminated by lubricating oil and other greases. If necessary, use soapy water to clean it, and then use it again after drying.

B. Avoid the rubber pads being exposed to the sun and accelerate the aging of rubber and reduce elasticity;

C. Add a few drops of lubricating oil to the tie rod regularly, but be careful not to let the lubricating oil flow into the glue pad along the tie rod.

We adhere to”Customer first, integrity -based, excellence“The concept of your needs are our continuous innovation and continuous innovation and understanding. The Guangdong High Hardware Factory is fully equipped with perfect management and aims to make the products that users need. We look forward to working with you to create a win-win situation. Welcome to call us for negotiation.