product description:

R15 is an arc with a radius 15, and the wood is quickly rounded.
Scope of use: Suitable for all kinds of boards, but do not use them on too thin boards
Instructions:
1. Loosen the middle copper screw, adjust to the required corner, lock the screw, place it on the wooden board, hold the protrusion above the chamfer module, close to the wooden board, and keep your hands away from the tool.
2. After attaching tightly, close the wood board and close the tool, first cut the tip of the wood board into a rough shape, and then slowly walk against the module.
Notice:
1. It should be tried on a flipped bakelite milling and other workbench
2. Use a trimming knife with bearing on the top
3. Before use, you must first adjust the height of the trimming tool. If the machine is not turned on, please observe whether the trimming tool bearing is on the same plane as the rounded corner module to ensure that the milling tool will not have a scraper module, otherwise it may cause danger.
4. Solid wood should be drilled from left to right along the wood grain, and do not mill the reverse grain.

product weight:[Net weight of rounded corner module: 384g] [Net weight of beveled corner module: 378g] [Net weight of 3-piece combination module: 495g] [Gross weight of R5/R10 rounded corner module: 131g] [Gross weight of R15/R20 rounded corner module: 142g] [R25/R30 rounded corner module gross weight: 136g】【6.35mm milling cutter net weight: 29】【12.7mm milling cutter net weight: 61g】

Physical shooting

The product pictures are all taken in the real thing of the staff of the store

Transportation shipping

By default, if you need to send SFF, please notify the customer service in advance

Return or Refund

1.7 days No reason to return and exchange

2. All the goods issued by our store have been strictly inspected by quality.

3. Return generated by non -quality reasons requires buyers to bear the round -trip shipping fee

4. Thank you for reading, I wish you a happy shopping