This product supports one-piece delivery, welcome to consult!

Product file

Product name: Shuxin Palm Massager

Model: LJM-001

Product size: 140x141x57mm

Maximum power: 8W

Input voltage/current: DC5V

Lithium battery capacity: 2400mAh

Product material: ABS, stainless steel, PU leather

Single net weight: 0.455KG

Number of packing: 36pcs

Gross weight/net weight: 16.5KG/18KG

Function: Promote blood circulation, massage the palm, soothe the mouse hand and hand fatigue

Instructions for use

1. Please fully charge before using this product for the first time.Charging voltage/current DC5V     1000mA.You can also charge it with an isobaric power bank.It takes about 5 hours to fully charge (the charging time is related to the output current of the charger used).When charging, the red light flashes, and the red light is on after full charge.

2. Power switch instructions: Turn on the "" OFF/ON switch, and when the massager is turned on, there will be a prompt sound. After use or not to use it for a long time, please turn off the power in time.

3. Massage mode: "" is the mode button. The product has 3 modes: hammer, acupuncture, and pulse mode. The product defaults to hammer mode. Press "" to switch mode.After each mode switch, the intensity will return to 1 level.Intensity addition and subtraction or switching modes, a "beep" sound will sound.

4. Intensity addition and subtraction description: In the power-on state, "+" is the intensity enhancement button and "-" is the intensity reduction button. Each time you press, a "beep" sound will sound, indicating that the intensity increases by one level. The intensity addition and subtraction are 16 levels (0, 1, 2......16). When the intensity addition and subtraction reach 16 levels, press "beep" twice, and the intensity remains unchanged, and maintain 16 levels.

5. Press "+" and "-" at the same time for about 2 seconds to turn on the key mute mode.(Note: This function is not available when using a remote control.)

6. Description of the heat compress function: "" is the temperature heating key. Press the temperature key to "beep" to turn on the product heating function. The temperature is divided into first gear 38℃, second gear 42℃, third gear is closed, and cycle in turn.(Note: The heat compress function will not be used when charging.)

7. When the product is used, the product will automatically return to 0 levels after about 1 second without contact.

8. After the product is turned on for 15 minutes, the massage mode will return to 0 levels (the heat compress remains unchanged).

9. When the product's battery is low, the indicator light turns red and flashes. Please charge it in time.

Precautions

1. Recommended: For people aged 6 years and above, children must use it under adult supervision.

2. Do not use or store this product in the following places:

※Sites with direct sunlight ※Sites with high temperature and humidity ※Sites with water ※Sites with more dust

※Near fireworks※Sites that are easily affected by vibrations※Strong electromagnetic places

3. Do not insert and unplug the USB charging cable with wet hands or use the product to operate it, otherwise it may cause electric shock or accidents.

4. Do not use it in places with high humidity such as bathrooms, otherwise it may increase the electric shock intensity and damage the product.

5. Do not use it for children or people without the ability to express their consciousness, otherwise it will cause accidents or cause physical discomfort.

6. When not used for a long time, please place the product in a dry environment.

7. When unplugging the USB charging cable from the product, do not pull the wire, but hold the wire plug and unplug it, otherwise it may cause electric shock or damage to the product.

8. The product electrode sheet has a surface heating function. Users who are not sensitive to heat or are prone to heat allergies should consult a doctor before using it.

9. If you feel unwell due to abnormality in this product, please stop using it immediately.

10. When the product works for a long time, the surface will be hot, which is a normal phenomenon.

11. Do not disassemble the internal device on your own to avoid damaging the parts.

12. Please remove the battery when the remote control battery is not in use for a long time (more than 3 months).

13. When replacing the remote control battery, do not install the negative electrode anyway.

14. After the battery of the remote control is used up, please discard it in accordance with the relevant regulations of the place of residence.

15. The electrode sheet of this product is irreplaceable; when the electrode sheet reaches its end, the entire product should be replaced.

16. Please use it on a table with an inclination of no more than 6 degrees to prevent it from falling.(To prevent falling over, please use it on a table with a slope less than 6 degrees.)