ย้อนกลับ





ราคาสินค้า

 ฿ 501.93  (¥ 99.00)

รูปแบบ/ขนาด








สรุปรายการสั่งซื้อ

รายละเอียดสั่งซื้อ จำนวน ราคา ราคารวม
จำนวนทั้งหมด ราคารวม



รายละเอียดสินค้า

Adaptability:

DJI RS 3

DJI RS 3 Pro

DJI RS 3 mini

DJI RS 2

DJI RS C2

Ronin SC

Ronin C

packing list:

Cellphone clip x 1

Cold boot seat x 1

M4 screws x 2

1/4"-20 screws x 1

Allen wrench x 2

Product parameters

Product size: 110 x 31.3 x 41.3mm

Packaging Size: 155 x 81.5 x 42mm

Product weight: 101 ± 5.0g

Packaging weight: 141 ± 5.0g

Main materials: aluminum alloy, stainless steel, silicone

Related products: 4118 3028C 4383 4197 4195 3252 2786B

SmallRig DJI Stabilizer Special Mobile Support

Selling point:

1. Designed for DJI RS 3 / RS 3 Pro / RS 3 mini / RS 2 / RS C2 / R S / R SC stabilizer, installed on the side slider of the stabilizer;

2. Quick horizontal and vertical switching, easy to shoot or monitor;

3. Rotate the joints at three places and freely adjust the angle of the mobile phone;

4. Reserve standard spacing threaded holes to facilitate installation of power bank clips 2336 and 2790.

SmallRig DJI Stabilizer Special Mobile Phone Holder 4301 is designed for DJI RS 3 / RS 3 Pro / RS 3 mini / RS 2 / RS C2 / R S / R SC stabilizer, and can be installed on the side slider of the stabilizer with M4 screws.When the phone needs to answer a call or use the phone, turn on the cold boot holder and quickly remove the phone.The mobile phone clamp can also be installed on the top of the camera with 1/4"-20 screws. The mobile phone clamp can hold a mobile phone with a width of 57-88mm, and can quickly adjust the horizontal and vertical screens. After rotating 90°, there is a snap position to fix the angle. There is a bottom of the mobile phone clamp.1/4"-20 threaded holes, which can be mounted on an RS 3 mini or tripod with a cold boot seat on top for microphone or constant light.

Precautions:

1. The maximum load-bearing of mobile phone clamp is 500g;

2. When installing the cold boot seat, be careful that the arrow must be facing upward;

3. When the mobile phone is installed on the side of the stabilizer in a vertical shooting state, the mobile phone will block the rotation of the stabilizer shaft arm; the mobile phone will not affect the horizontal shooting state.


สินค้าจากร้านเดียวกัน