Bulkiee.com | รวมของขายดี ราคาส่ง

เปิดผ่านแอปพลิเคชั่น

ย้อนกลับ

Fengqingyang Photographic

คัดสินค้าคุณภาพ

ดีลพิเศษ

ช่วยเคลมสินค้า

ออกใบกำกับภาษีได้

ใหม่กว่า TT560 แฟลชในกล้อง กล้อง SLR แฟลชภายนอกแบบพกพา แฟลชรองเท้าร้อนนอกกล้อง

คาดว่าจะได้รับ 7-10 วัน
รับคูปองส่วนลดเข้าระบบทันที 3% หากส่งล่าช้ากว่ากำหนด*
*ระยะเวลาเริ่มนับหลังจากโรงงานจัดส่งสินค้าเข้ายังศูนย์กระจายสินค้าของบริษัทฯ

ราคาสินค้า

฿ 1262.43 (¥ 249.00)

ระบุจำนวน

สรุปรายการสั่งซื้อ

รายละเอียดสั่งซื้อ	จำนวน	ราคา	ราคารวม
จำนวนทั้งหมด		ราคารวม

คละแบบ/สีได้

รายละเอียดสินค้า

NEEWER TT560 机顶闪光灯单反相机便携外置闪光灯离机热靴闪光灯

NEEWER TT560 Flash Speedlite for Canon Nikon Panasonic Olympus Fujifilm Pentax ALL DSRL Cameras with Standard Hot Shoe(10003635)

Power Management: Switch to the ON position, and the flash will start charging (the charging indicator is dim). After several seconds, the charging indicator turns red and TT560 is then ready to shoot. For a test flash, simply press the test button. If the red charging indicator lamp flickers, it indicates low battery. In such case, the power will turn off automatically and you need to replace the batteries. After use, turn power switch to OFF position. Power Control: The flash unit has 8 steps of power output control which indicated by 8 pieces of LED lamp for different level. Press "+" and "-" to raise and lower power: 1/128,1/64,1/32,1/16,1/8,1/4,1/2,1/1

Specifications:

Guide Number:38 ( ISO 100 )

Flash Mode: M, S1, S2

Vertical Rotation Angle :0~90 degrees

Horizontal Rotation Angle: 0~270 degrees

Power: 4xAAsize batteries ( Alkaline or Ni-MH are usable )

Light Quantity Output Control :with 1/8 - stop increment

Color Temperature: 5600K

Flash Duration :1/300s~1/20000s

Dimensions :190*75*55mm

Net Weight :286g

1. Power Management

(1) Switch to the ON, the flash will start charging (the charging indicator is dim). After several seconds, the charging indicator turns red and TT560 is ready to shoot.

(2) For a test flash, press the test button. After use, press the ON/OFF to OFF to power off.

(3) If the red charging indicator lamp flickers in every 1s, it indicates low battery. In such

case, the power will turn off automatically and you need to replace the batteries.

2. Power Control

(1) The flash unit has 8 steps of power output control which indicated by 8 pieces of LED

lamp for different level.

(2) Press "+" to make power higher and they are 1/128,1/64,1/32,1/16,1/8,1/4,1/2,1/1.

Otherwise, press "-" to make power lower.

3. M Mode

Press the MODE key to M Mode. In this mode, you can set TT560 On to your camera

hot shoe or speedlite trigger hot shoe to trigger the flash unit. When shooting, adjust the

flash power and press the camera shutter, the flash light will flash under the camera

synchronous signal.

4. S1 Mode

(1) Press the MODE key to S1 Mode. The Mode is applicable for slave flash in order to

create many lighting effects. It is respectively applicable for manual flash environment.

(2) When the flash is S1 mode, it will fire synchronously when the master flash fires,

comparable with the effect by the use of radio trigger.

5. S2 Mode

Press the MODE key to S2 Mode. The mode is applicable for slave flash in order to

create many lighting effects. It is respectively applicable for TTL flash environment. The

flash unit won't flash synchronously with the first flash but the second flash from the

master flash.

6. Power-saving Function

(1) To save battery power, the flash will enter stand-by state in about 30 minutes of idle

use. Press any button to wake it up.

(2) In S1/S2 mode, the flash will enter stand-by state in about 60 minutes of idle use.

Press any button to wake it up.

(3) In Power-saving mode, the charging indicator flickers in every 3 seconds. Other

Indicators are turned off.

7. Protection Function

(1) Protection in continuous flashes

To prevent the flash head from getting too hot and damage, please do not flash over 20

times when in power lever 1/2,1/1. Please cool down the flash unit for at least 10

minutes. The over-temperature protection function will be activated if you continue to

flash after 20 times. In this state the charging time will turn to 10-25s. Please cool down

the flash unit around 10 minutes and it will turn to normal state.

(2) Systematic over-temperature protection

When the inner circuit is over-heating, which indicates over use of the flash unit, the inner

circuit will shut down power automatically. The flash unit will turn to normal state after the

inner circuit is cooled down.

Safety Features And Information

For protection in continuous flashes, to prevent the flash head from getting too hot and damage, please do not flash over 20 times when in power lever 1/2,1/1. Please cool down the flash unit for at least 10 minutes. The over-temperature protection function will be activated if you continue to flash after 20 times. In this state the charging time will turn to 10-25s. Please cool down the flash unit around 10 minutes and it will turn to normal state.

When the inner circuit is over-heating, which indicates over use of the flash unit, the inner circuit will shut down power automatically. The flash unit will turn to normal state after the inner circuit is cooled down.

หน้าหลัก

คำนวนค่าขนส่ง (จีน-ไทย)

โปรโมชั่นประจำเดือน

Academy